Hauled some more lumber and plywood up to the garage after church today. Put together the first of the two side walls. These are 6' high, and will hold up the low side of the roof. I decided to keep them simple, with just a 27" window in the center. Here is the first one completed.

Here's the back (inside) view.

I rolled it out to the treehouse on the dolly. Sounds easy right? Of course it is. Unless the wall weighs 60lb and is almost 8' wide. And it's downhill about 6'. And there are low spots on the grass. Nevertheless, I persevered and got it down to the treehouse where I placed it next to the ladder.


Then I began construction on wall #3.


5 Blue Angels jets flew by in formation just a little south, at 1:43PM. It was nice to at least catch a glimpse. Next year perhaps we'll go. After another hour, I had the second wall constructed, a duplicate of the first.



Now, it was time to haul it down to the treehouse... I paused to rest a moment and get a picture.


Now, I just have to figure out how I am going to get 300lb of walls up 10'...


More to follow.

Spent about three hours and a lot of hard labor this morning putting together the first of the four walls for the treehouse. It was drizzling slightly, so I dragged all the wood into the garage and assembled the pieces together on the garage floor. Here is the first section completed..

Then, I cut the top angled pieces, and chopped off each of the vertical studs at the right place. I screwed and nailed the top angled pieces to the cut studs, and applied the next piece of plywood. I marked and cut the plywood for the window and the roof line and put them all together. My wife and I hauled the hundred pound wall out to the yard and propped it up under the treehouse.



Now, I just need to figure out how to get that enormous wall (and three others) up to the platform...

It's so annoying when software gives me an option to do something, then just doesn't do it. Firefox 2 (and now 3) is a very nice place to browse. It has lots of cool features like tabbed browsing. I love this feature, and tell Firefox to open all pop-ups in a tab instead of a new window.

For some reason there is one stubborn link that opens it in a new window anyway. After a bit of research, I discovered that there IS a way to fix it!

open the about:config page, and change the "browser.link.open_newwindow.restriction" setting to 0 (zero).

This seems to do the trick! No muss no fuss. Does this work in 3.0 as well? Let me know if you have tried it out...

Here is a test link:
John Boal's Blog


If it opens in a tab, you've fixed it!

Today I made some Swiss Pancakes, just like my mother made me when I was a boy, and like her mother made for her when she was a girl.

They are not "pancakes" in the conventional [buttermilk] sense, they are more like crepes. But, the French already have a copyright on that I think. They are pancakes in the sense that they are cooked in a hot pan. They are very thin, and we would always just put a thin layer of jam or jelly on the inside and sort of roll them up to eat them. Pretty good stuff! Here's the recipe, enjoy!

Swiss Pancakes

• 2 cups flour
• 2 eggs
• 1 1/2 cups milk
• 1/8 tsp salt [optional]

Mix liquid ingredients, and sprinkle in flour while stirring, a bit at a time so it doesn't get too lumpy. A few little lumps are OK.

Heat pan on medium heat and spray on some olive oil or canola oil - just a small amount. The pan doesn't have to be really really hot, medium heat works best.

Use a ladle to scoop up some batter and drop it in the middle of the pan. Using a spatula, spread the mix out starting from the center, and try to keep it in a mostly circular pattern. Keep spreading the batter out from the edges until there isn't any more batter to spread. Let it cook for a few seconds to a minute, then turn it over and cook it for a minute on the other side.

Serve warm, with jam or jelly. Makes enough for 3 hungry pancake eaters.

Finally got an hour to spend on the streaming chart page from the weather system. I managed to refactor the code to improve the accuracy of the plotting of points and the labels on the axis, which didn't quite match up... Let's just say that this code is "legacy" code and we'll leave it at that... It's not the kind of thing I'd want to admit to really, being a test driven developer.. but hey it was written many years ago and I just didn't have the time or inclination at that time to test it properly. My bad. One of these days I'll get to it. Right after the treehouse. And the deck. And the new bathroom. And the kitchen remodel. And the new workshop. Did I mention the lawn needs mowing too?

Anyway... the charts are working better now, enjoy...

I decided today on a whim to check out my Alton 3.5KW generator, and see what kind of waveform it was putting out. I had read a few things online that caused me to wonder about the quality of the power it puts out for me... I hooked it up and measured it with my oscilloscope.

As I don't have a 10x probe at my disposal, I had to adjust the image so i could see the top of the waveform. It's not a sine wave, but it does have the general shape and only a few deformations. Much better than most of the UPS signals I have seen...

This is my secondary generator, the one that will run the well pump and pressure pump for the wellhouse in the event of a power outage - so I can have RUNNING WATER... I didn't get a chance to measure the output of the main gen that powers the house. Perhaps I will take a look at that in the near future, just for grins...

Got to spend some time (and money and sweat) on the treehouse project this weekend. I was able to get the parts ($40) and labor together to get the stairway built. I got it built, and mounted, and the hinges put on the trap door. Now, one can ascend the ladder to push up to open the trap door and be atop the platform that someday will be the floor of a grand tree home!

Notice now the new front right corner support that was refactored and re-added NOT to go THROUGH the ladder this time.

THIMK. Pla
n. Ahead.

Many hours of sweat and two mosquito bites later, we have a completed ladder and door. Now, on to something more substantial like WALLS...

Here is a shot of me and my son drilling the holes in the 2x6's we used for the ladder.